What causes Oil leaks from rocker covers and pushrod tubes on the Moto Guzzi V9 Bobber?

Look for oil weeping around cylinder heads when warm Estimated fix cost: $100-$300

What causes Electrical gremlins, corroded connectors on the Moto Guzzi V9 Bobber?

Test all lights, dashboard warnings, and battery voltage Estimated fix cost: $50-$400

Bounce test rear, check for leaking or spongy suspension Estimated fix cost: $200-$600

Rough idle, surging at low RPM, uneven throttle response Estimated fix cost: $80-$150

Known issues to inspect before buying a used Moto Guzzi V9 Bobber. What to check and how much repairs cost.

MODERATE

Look for oil weeping around cylinder heads when warm

Fix cost: $100-$300

MINOR

Rough idle, surging at low RPM, uneven throttle response

Fix cost: $80-$150

MODERATE

Test all lights, dashboard warnings, and battery voltage

Fix cost: $50-$400

MODERATE

Bounce test rear, check for leaking or spongy suspension

Fix cost: $200-$600

☐Check service history, valve clearances done

☐Inspect final drive bevel box for leaks

☐Cold start test, listen for top-end noise

☐Confirm throttle body sync recently performed

Decent but needs attentive maintenance and dealer support