What causes DCT dual-clutch jerky/hesitant low-speed engagement on the Honda Integra 700?

Test slow creep in D mode, listen for clunks Estimated fix cost: $200-$600

What causes Final drive belt wear and tension issues on the Honda Integra 700?

Inspect belt for cracks, fraying, check tension spec Estimated fix cost: $150-$400

Cold start idle quality, any hunting or stalling Estimated fix cost: $80-$200

Scan for fault codes before buying, test all modes Estimated fix cost: $300-$1200

Known issues to inspect before buying a used Honda Integra 700. What to check and how much repairs cost.

MODERATE

Test slow creep in D mode, listen for clunks

Fix cost: $200-$600

MODERATE

Inspect belt for cracks, fraying, check tension spec

Fix cost: $150-$400

MINOR

Cold start idle quality, any hunting or stalling

Fix cost: $80-$200

SERIOUS

Scan for fault codes before buying, test all modes

Fix cost: $300-$1200

☐Test DCT in all modes including sport

☐Check service history for belt replacements

☐Inspect for coolant leaks around water pump

☐Verify no warning lights during test ride

Generally reliable if maintained, DCT needs attention