Menu
🏍️
Bikes
⭐
Reviews
βš–οΈ
Compare
πŸ“š
Guides
πŸ“Š
Samples
camera_alt
Free Inspection
Start a new bike check
Privacy
Terms
All Bikes/Aprilia/Shiver 900/Problems
← Back to Aprilia Shiver 900

Aprilia Shiver 900 Common Problems

Known issues to inspect before buying a used Aprilia Shiver 900. What to check and how much repairs cost.

Throttle body sync causing rough idle/surging

MODERATE

Test idle smoothness, any hesitation during low-rpm riding

Fix cost: $150-$300

Fuel pump failure or weak fuel delivery

SERIOUS

Listen for pump prime noise, check for stalling under load

Fix cost: $300-$500

Regulator/rectifier overheating and failure

SERIOUS

Check battery voltage at idle and rev, inspect R/R location heat

Fix cost: $150-$350

Clutch slave cylinder seal leaking

MODERATE

Inspect clutch lever feel, look for fluid weeping at slave cylinder

Fix cost: $100-$250

Pre-Purchase Checklist

☐Check service history, valve clearances done
☐Inspect for crash damage on fairings and frame
☐Test all electronics, ABS, and dash functions
☐Verify no oil leaks around engine and gearbox

Decent but needs diligent maintenance and electrical monitoring