Menu
๐Ÿ๏ธ
Bikes
โญ
Reviews
โš–๏ธ
Compare
๐Ÿ“š
Guides
๐Ÿ“Š
Samples
camera_alt
Free Inspection
Start a new bike check
Privacy
Terms
All Bikes/Aprilia/Shiver 900/Problems
โ† Back to Aprilia Shiver 900

Aprilia Shiver 900 Common Problems

Known issues to inspect before buying a used Aprilia Shiver 900. What to check and how much repairs cost.

Throttle body sync causing rough idle/surging

MODERATE

Test idle smoothness, any hesitation during low-rpm riding

Fix cost: $150-$300

Fuel pump failure or weak fuel delivery

SERIOUS

Listen for pump prime noise, check for stalling under load

Fix cost: $300-$500

Regulator/rectifier overheating and failure

SERIOUS

Check battery voltage at idle and rev, inspect R/R location heat

Fix cost: $150-$350

Clutch slave cylinder seal leaking

MODERATE

Inspect clutch lever feel, look for fluid weeping at slave cylinder

Fix cost: $100-$250

Pre-Purchase Checklist

โ˜Check service history, valve clearances done
โ˜Inspect for crash damage on fairings and frame
โ˜Test all electronics, ABS, and dash functions
โ˜Verify no oil leaks around engine and gearbox

Decent but needs diligent maintenance and electrical monitoring