Menu
🏍️
Bikes
⭐
Reviews
⚖️
Compare
📚
Guides
📊
Samples
camera_alt
Free Inspection
Start a new bike check
Privacy
Terms
All Bikes/Ktm/500 Exc-f/Problems
← Back to Ktm 500 Exc-f

Ktm 500 Exc-f Common Problems

Known issues to inspect before buying a used Ktm 500 Exc-f. What to check and how much repairs cost.

Hot start valve failure causes hard starting

MODERATE

Test hot restart, inspect valve for wear or damage

Fix cost: $50-$150

Valve clearance goes tight, causes poor compression

SERIOUS

Compression test, ask for valve service history

Fix cost: $200-$600

Coolant leaks from water pump seal

MODERATE

Inspect weep hole under pump for residue or staining

Fix cost: $80-$200

Worn rear linkage bearings cause sloppy handling

MODERATE

Grab swingarm and check for play or clunking movement

Fix cost: $100-$300

Pre-Purchase Checklist

☐Check hours meter, valves due every 15-20hrs
☐Cold and hot start test, note difficulty
☐Inspect frame welds for cracks near headstock
☐Verify radiators straight, no coolant leaks present

Strong engine, maintenance-dependent, avoid neglected bikes