John Deere Skidder/feller Cab (not A Motorcycle)
Khỏa Thân
Cơ thể
🔧 Service Schedule & Parts
Affiliate · we may earn| Service item | Every | Typical cost | Parts |
|---|---|---|---|
| 🛢️ Engine oil + oil filter | 500 km / 500 mi or 12 mo | $150-350 | 🛢️ Buy → ⚙️ Buy → |
| 🌬️ Air filter | 1,000 km / 500 mi | — | 🌬️ Buy → |
| ⚡ Spark plugs | 0 km / 0 mi | — | ⚡ Buy → |
| 🔧 Valve clearance check | 2,000 km / 1,000 mi | $600-1200 | |
| 🔗 Chain & sprockets | 1500-3000 km (replace) | $4000-9000 | 🔗 Buy → |
| 🛑 Brake pads | 6000-10000 km | $1500-4000 | 🛑 Buy → |
| 💧 Brake fluid | 4,000 km / 2,500 mi or 2 yr | — | |
| 🧊 Coolant | 6,000 km / 3,500 mi | — | |
| 🛞 Tires | 4000-8000 km | $7000-14000 | 🛞 Buy → |
| 🔩 Major service | 2,000 km / 1,000 mi | $2500-6000 |
Những điều người mua nên biết
Certified FOPS/OPS Protection
Deere skidder and feller buncher cabs are built as certified ROPS/FOPS/OPS structures with heavy screens and thick polycarbonate glazing to stop falling limbs and saw debris. Any welding, drilling, or repair to the frame can void the certification, so inspect for past damage or homemade modifications before buying.
Watch Seals, Mounts And HVAC
The most common problems are worn cab isolator mounts, leaking door and window seals, and pressurizer/AC systems plugged with sawdust, which lets dust and heat into the cab. Also check floor pans and harness pass-throughs for corrosion and chafing from years of vibration and pressure washing.
Cab Condition Drives Resale
A tight, quiet cab with working climate control, intact glass/guards, and a good rotating or reversing seat and joystick controls can add thousands to a machine's value, since replacement glass, screens, and seat assemblies are expensive. Deere's strong dealer parts support helps resale, but cabs are model-specific and rarely swap between series.
Top 10 Accessories
Curated picks for the John Deere Skidder/feller Cab (not A Motorcycle) — owned, ridden, recommended.
Các vấn đề thường gặp
🔥 3 CRITICALPressure-wash, inspect welds, pry test all pins
Cylinder drift, wet spots, oil level and color
Cut speed, bar wear, head slop, tilt pins
Oil for metal, noise under load, wheel wobble
✅Danh sách kiểm tra trước khi mua hàng
Strong machines, but deferred maintenance gets expensive fast
More John Deere Skidder/feller Cab (not A Motorcycle) Guides
More from John Deere
View all John Deere models →Community Reviews
Discussion
Frequently Asked Questions
What are common problems with the John Deere Skidder/feller Cab (not A Motorcycle)? +
Boom/arch weld cracks and pin bushing wear: Pressure-wash, inspect welds, pry test all pins (serious) | Hydraulic leaks at hoses, cylinders, swing motor: Cylinder drift, wet spots, oil level and color (moderate) | Grapple/felling head and saw motor wear: Cut speed, bar wear, head slop, tilt pins (serious)
Is the John Deere Skidder/feller Cab (not A Motorcycle) good for beginners? +
Not really — the John Deere Skidder/feller Cab (not A Motorcycle) is better for experienced riders.
Is the John Deere Skidder/feller Cab (not A Motorcycle) reliable? +
Owners report 3 critical issues to watch for on the John Deere Skidder/feller Cab (not A Motorcycle), notably: Boom/arch weld cracks and pin bushing wear (Pressure-wash, inspect welds, pry test all pins). Buy with a pre-purchase inspection.
Is the John Deere Skidder/feller Cab (not A Motorcycle) good for daily use? +
Better as a weekend/track bike than a daily — it's a specialist machine.
What gear should I buy for a John Deere Skidder/feller Cab (not A Motorcycle)? +
Motoryk has curated a Top 10 gear list specifically for the John Deere Skidder/feller Cab (not A Motorcycle), covering engine oil, tires, chain, battery, and brake pads — see motoryk.com/bikes/john-deere/skidder-feller-cab-not-a-motorcycle/top10. Each pick is matched to this bike's spec.