Menu
🏍️
Bikes
Reviews
⚖️
Compare
📚
Guides
📊
Samples
camera_alt
Free Inspection
Start a new bike check
Privacy
Terms
All Bikes/Husqvarna/Fe 501
Husqvarna Fe 501
Enduro

Husqvarna Fe 501

The Husqvarna Fe 501 has a top speed of ~145 km/h (estimated; note: gearing and terrain dependent), produces ~63 hp and weighs ~111 kg. Motoryk rates it 8.5/10.

Husqvarna FE 501 được giới thiệu vào năm 2014 như một phần của sự ra mắt lại của Husqvarna dưới quyền sở hữu của Tập đoàn KTM, chia sẻ nền tảng của nó với KTM 500 EXC. Nó nhanh chóng trở thành một trong những mô tô enduro có khả năng và mạnh mẽ nhất hiện có, thu hẹp khoảng cách giữa hiệu suất off-road mạnh mẽ và khả năng sử dụng hợp pháp trên đường phố ở nhiều thị trường. FE 501 đã trải qua quá trình phát triển liên tục bao gồm việc áp dụng phun nhiên liệu vào năm 2017, khiến nó trở thành lựa chọn hàng đầu cho các cuộc đua enduro cứng và đua xuyên quốc gia.

~63 hp

Quyền lực

~55 Nm

Mô-men xoắn

~111 kg

Cân nặng

~145 km/h (estimated; note: gearing and terrain dependent)

Tốc độ tối đa

~6–8 L/100km (estimated real-world average depending on terrain and riding style)

Nhiên liệu

Khỏa Thân

Cơ thể

search Kiểm tra chiếc xe đạp này ngay bây giờ

Video Review

Watch Video Review

Những điều người mua nên biết

⚙️

KTM-Shared Engine Platform

The FE 501 shares its 510cc single-cylinder engine with the KTM 500 EXC-F, meaning parts are widely available and mechanics familiar with KTM can easily service it. This broad parts network helps keep long-term ownership costs manageable.

⚠️

Watch the Valve Intervals

Valve clearance checks are recommended every 40-60 hours of riding, and neglecting this is the most common cause of premature engine wear on this model. Always ask sellers for documented maintenance records before buying used.

💰

Strong Resale Value

Husqvarna FE 501s hold their value exceptionally well due to high demand and limited supply, often retaining 70-80% of their value after two years. Low production numbers compared to Japanese competitors makes finding a deal rare but rewarding.

Các thế hệ & Thông số kỹ thuật theo năm

2014–2016 Gen 1

Được giới thiệu dưới dạng nền tảng dựa trên KTM 500 EXC, hệ thống treo WP, phun nhiên liệu, tiêu chuẩn khởi động điện.

expand_more
2017–2019 Gen 2

Hình dạng khung sửa đổi, hệ thống treo WP XACT cập nhật, cải thiện công thái học, ngôn ngữ thiết kế thân xe mới.

expand_more
2020–2022 Gen 3

Khung nhẹ hơn mới, phanh Brembo, bản đồ động cơ cập nhật, hộp khí được sửa đổi, kiểu dáng thân xe mới.

expand_more
2023–2024 Gen 4

Khung thép chromoly mới, động cơ cập nhật, phun nhiên liệu cải tiến, cài đặt hệ thống treo sửa đổi, thân xe mới.

expand_more

Đánh giá người mua đã qua sử dụng

8.5/10
Tốt nhất cho
Serious off-road riders wanting road-legal capability

"The ultimate trail weapon if you commit to proper maintenance."

$7,500-$11,000 used

The FE 501 is essentially a KTM 500 EXC wearing premium Swedish clothes, which means you're getting one of the best dual-sport platforms ever built but with slightly more character. The WP suspension is genuinely excellent, the engine is a torque monster that'll pull from nothing and still scream to redline, and the ergonomics are properly tall-person friendly. Used examples hold value stubbornly, so don't expect bargains. Here's the honest bit: these bikes demand maintenance. Valve clearances need checking every 50-100 hours, not every 12 months like your old adventure bike. Always ask for service records and get deeply suspicious if none exist. Oil changes should be almost obsessively regular given the high-strung single-cylinder nature. Worn suspension linkage bearings are common on neglected examples — budget for that. The reward for due diligence is a bike that's genuinely transformative off-road while remaining road-legal. It's not comfortable on long tarmac slogs, but for aggressive trail riding with occasional road connections, nothing touches it.

Ưu điểm
Nhược điểm
Bỏ qua nếu: You skip services or hate wrenching

Top 10 Accessories

Curated picks for the Husqvarna Fe 501 — owned, ridden, recommended.

Affiliate · we may earn

Các vấn đề thường gặp

🔥 1 CRITICAL
⚠️Valve clearance tightens, causes hard starting MODERATE

Cold start difficulty, ask when valves last checked

Fix cost: $150-$400
💡Throttle body and injector fouling MINOR

Rough idle, hesitation on throttle response

Fix cost: $50-$150
🔥Frame cracks near subframe mounting points SERIOUS

Inspect welds visually, especially rear subframe junction

Fix cost: $200-$800
⚠️Water pump seal failure, coolant leaks MODERATE

Coolant level, staining below water pump weep hole

Fix cost: $80-$200

Danh sách kiểm tra trước khi mua hàng

Check service history and valve records
Cold start the bike before buying
Inspect frame welds thoroughly
Verify coolant color and level

Solid bike, maintenance-sensitive, worth buying carefully

Full Specifications

Engine Power ~63 hp @ 8,000 rpm (estimated; varies slightly by model year)
Torque ~55 Nm @ 6,500 rpm (estimated; varies slightly by model year)
Top Speed ~145 km/h (estimated; note: gearing and terrain dependent)
Weight ~111 kg (wet/curb weight, varies by model year)
Fuel Consumption ~6–8 L/100km (estimated real-world average depending on terrain and riding style)
Type Enduro
Fairing No Fairing (Naked)

Rivals & Alternatives

Bikes that buyers cross-shop with the Husqvarna Fe 501

Compare Husqvarna Fe 501 Side-by-Side

compare_arrows

Specs, power, weight & buyer verdict — head-to-head with the bikes most often cross-shopped.

More Husqvarna Fe 501 Guides

More from Husqvarna

View all Husqvarna models →

Community Reviews

Discussion

Frequently Asked Questions

What are common problems with the Husqvarna Fe 501? +

Valve clearance tightens, causes hard starting: Cold start difficulty, ask when valves last checked (moderate) | Throttle body and injector fouling: Rough idle, hesitation on throttle response (minor) | Frame cracks near subframe mounting points: Inspect welds visually, especially rear subframe junction (serious)

Is the Husqvarna Fe 501 a good motorcycle? +

The ultimate trail weapon if you commit to proper maintenance. Rating: 8.5/10. Best for: Serious off-road riders wanting road-legal capability. Avoid if: You skip services or hate wrenching.

What is the horsepower of the Husqvarna Fe 501? +

The Husqvarna Fe 501 produces ~63 hp @ 8,000 rpm (estimated; varies slightly by model year), with ~55 Nm @ 6,500 rpm (estimated; varies slightly by model year) of torque. Top speed: ~145 km/h (estimated; note: gearing and terrain dependent).

Is the Husqvarna Fe 501 good for beginners? +

Not really — the Husqvarna Fe 501 is better for experienced riders. Serious off-road riders wanting road-legal capability Avoid if: You skip services or hate wrenching

Is the Husqvarna Fe 501 reliable? +

Owners report 1 critical issue to watch for on the Husqvarna Fe 501, notably: Frame cracks near subframe mounting points (Inspect welds visually, especially rear subframe junction). Buy with a pre-purchase inspection.

Is the Husqvarna Fe 501 good for daily use? +

Serious off-road riders wanting road-legal capability Fuel: ~6–8 L/100km (estimated real-world average depending on terrain and riding style).

How fast is the Husqvarna Fe 501? +

The Husqvarna Fe 501 reaches a top speed of ~145 km/h (estimated; note: gearing and terrain dependent), producing 63 hp at 111 kg curb weight. Real-world performance depends on rider weight, gearing, and road conditions.

What gear should I buy for a Husqvarna Fe 501? +

Motoryk has curated a Top 10 gear list specifically for the Husqvarna Fe 501, covering engine oil, tires, chain, battery, and brake pads — see motoryk.com/bikes/husqvarna/fe-501/top10. Each pick is matched to this bike's spec.