Menu
🏍️
Bikes
Reviews
⚖️
Compare
📚
Guides
📊
Samples
camera_alt
Free Inspection
Start a new bike check
Privacy
Terms
All Bikes/Honda/CR250R
Supermoto

Honda CR250R

The Honda CR250R has a top speed of 130 km/h, produces 49 hp and weighs 103 kg.

Introduced in 1973 as Honda's first mass-produced 250cc motocross machine, the CR250R evolved through air-cooled, water-cooled and finally twin-spar aluminium-framed generations before production ended in 2007. It is notable for its championship pedigree (Rick Johnson, Jeremy McGrath, Ricky Carmichael) and as one of the last great 250cc two-stroke motocrossers before four-strokes took over.

49 hp

الطاقة

42 Nm

عزم الدوران

103 kg

الوزن

130 km/h

توب سبيد

8.5 L/100km

الوقود

عاري

جسم

search افحص هذه الدراجة الآن

🔧 Service Schedule & Parts

Affiliate · we may earn
📍 What's due on yours?
1978-1996 steel frame; 1997-2001 twin-spar steel/alloy; 2002-2007 aluminium frame (final gen)
Service item Every Typical cost Parts
🛢️ Engine oil + oil filter 300 km / 0 mi or 1 mo $15-30 🛢️ Buy →   ⚙️ Buy →
🌬️ Air filter 50 km / 0 mi 🌬️ Buy →
⚡ Spark plugs 1,500 km / 1,000 mi ⚡ Buy →
🔗 Chain & sprockets 1500-4000 km (replace) $150-300 🔗 Buy →
🛑 Brake pads 1500-3000 km $40-80 🛑 Buy →
💧 Brake fluid 3,000 km / 2,000 mi or 2 yr
🧊 Coolant 2,000 km / 1,000 mi
🛞 Tires 800-2000 km $150-300 🛞 Buy →
🔩 Major service 1,500 km / 1,000 mi $400-900
💰 Annual upkeep ~$800-2000 🔩 Reliability 7/10 Two-stroke motocrosser with no valves to adjust; service is measured in engine hours, not km, and dominated by frequent gearbox oil, air filter and top-end rebuilds.

ما يجب أن يعرفه المشترون

💡

Late aluminium models best

The 2002–2007 bikes with the fifth-generation aluminium frame and 47mm Showa forks are the most desirable and parts are still reasonably available. Ask for hours since the last top-end and check the cylinder plating with a torch before buying.

⚠️

Power valve and jetting

The HPP power-valve mechanism gums up with carbon and can lose its seal, causing a flat midrange, and 2002+ models were often criticised for soft low-end and fussy Keihin PWK jetting. Also inspect aluminium frames and subframes for cracks around the shock mount and footpeg area on hard-raced examples.

🔧

Two-stroke race schedule

Expect a piston and ring every 20–40 hours, crank bearings/seals around 80–100 hours, and premix at roughly 32:1 with quality synthetic oil. Clean the power valve, grease the linkage and swingarm bearings, and service the air filter and fork/shock oil regularly since these bikes were built for racing, not neglect.

Top 10 Accessories

Curated picks for the Honda CR250R — owned, ridden, recommended.

Affiliate · we may earn

مشاكل شائعة

🔥 1 CRITICAL
⚠️Worn top end, low compression MODERATE

Kick compression, exhaust port scoring, smoke, hard starting

Fix cost: $150-$400
🔥Crank bearing and seal failure SERIOUS

Side-to-side flywheel play, gear oil, coolant loss

Fix cost: $500-$900
💡Power valve carbon buildup, sticking linkage MINOR

Remove cover, check valve movement and linkage arms

Fix cost: $50-$200
⚠️Worn suspension, blown fork and shock seals MODERATE

Fork oil weeping, shock sag, linkage bearing play

Fix cost: $300-$700

قائمة مراجعة ما قبل الشراء

Cold start it yourself, listen for rattles
Check frame welds, subframe for cracks
Inspect swingarm, linkage, wheel bearing play
Verify title, hours, maintenance records exist

Strong if maintained; neglect gets expensive fast

Full Specifications

Engine Power 49 hp @ 8,000 rpm
Torque 42 Nm @ 7,000 rpm
Top Speed 130 km/h
Weight 103 kg (wet weight)
Fuel Consumption 8.5 L/100km
Type Supermoto
Fairing No Fairing (Naked)

More Honda CR250R Guides

More from Honda

View all Honda models →

Community Reviews

Discussion

Frequently Asked Questions

What are common problems with the Honda CR250R? +

Worn top end, low compression: Kick compression, exhaust port scoring, smoke, hard starting (moderate) | Crank bearing and seal failure: Side-to-side flywheel play, gear oil, coolant loss (serious) | Power valve carbon buildup, sticking linkage: Remove cover, check valve movement and linkage arms (minor)

What is the horsepower of the Honda CR250R? +

The Honda CR250R produces 49 hp @ 8,000 rpm, with 42 Nm @ 7,000 rpm of torque. Top speed: 130 km/h.

Is the Honda CR250R good for beginners? +

Yes — the Honda CR250R is a reasonable choice for new riders (49 hp is manageable), weighing 103 kg.

Is the Honda CR250R reliable? +

Owners report 1 critical issue to watch for on the Honda CR250R, notably: Crank bearing and seal failure (Side-to-side flywheel play, gear oil, coolant loss). Buy with a pre-purchase inspection.

Is the Honda CR250R good for daily use? +

Suited for daily supermoto use — 8.5 L/100km fuel economy.

How fast is the Honda CR250R? +

The Honda CR250R reaches a top speed of 130 km/h, producing 49 hp at 103 kg curb weight. Real-world performance depends on rider weight, gearing, and road conditions.

What gear should I buy for a Honda CR250R? +

Motoryk has curated a Top 10 gear list specifically for the Honda CR250R, covering engine oil, tires, chain, battery, and brake pads — see motoryk.com/bikes/honda/cr250r/top10. Each pick is matched to this bike's spec.