🔧 Service Schedule & Parts
Affiliate · we may earn| Service item | Every | Typical cost | Parts |
|---|---|---|---|
| 🛢️ Engine oil + oil filter | 3,000 km / 2,000 mi or 6 mo | $20-40 | 🛢️ Buy → ⚙️ Buy → |
| 🌬️ Air filter | 6,000 km / 3,500 mi | — | 🌬️ Buy → |
| ⚡ Spark plugs | 6,000 km / 3,500 mi | — | ⚡ Buy → |
| 🔧 Valve clearance check | 12,000 km / 7,500 mi | $80-150 | |
| 🔗 Chain & sprockets | 20000-30000 km (replace) | $80-150 | 🔗 Buy → |
| 🛑 Brake pads | 10000-20000 km | $20-40 | 🛑 Buy → |
| 💧 Brake fluid | 24,000 km / 15,000 mi or 2 yr | — | |
| 🛞 Tires | 15000-25000 km | $120-250 | 🛞 Buy → |
| 🔩 Major service | 12,000 km / 7,500 mi | $150-300 |
खरीदारों को क्या पता होना चाहिए
Bulletproof Engine Reliability
Honda's SOHC 125-250cc engines from this era are legendary for longevity, often running well past 50,000 miles with basic maintenance. Parts are still widely available and affordable, making repairs straightforward for DIY mechanics.
Watch for Carb & Rust
Sitting bikes commonly suffer from gummed-up carburetors and corroded fuel tanks — budget for a full carb rebuild if the bike hasn't run recently. Check frame welds carefully on custom bobber builds, as amateur chops can compromise structural integrity.
Strong Bobber Market Value
Well-executed CB/CL bobber builds consistently sell for $2,500–$5,000+, often exceeding stock bike prices due to custom appeal. Clean, titled examples with quality café or bobber work hold value well and attract strong buyer interest.
Top 10 Accessories
Curated picks for the Honda Cb/cl 125-250 Custom Bobber — owned, ridden, recommended.
सामान्य समस्याएँ
🔥 2 CRITICALCold start, idle quality, throttle response smoothness
All lights, kill switch, horn, charging voltage at battery
Cold start rattle, listen at top end on idle
Inspect welds, neck, downtube closely under any wrap or paint
✅प्री-परचेज चेकलिस्ट
Solid if unmolested, risky as heavy custom
More Honda Cb/cl 125-250 Custom Bobber Guides
More from Honda
View all Honda models →Community Reviews
Discussion
Frequently Asked Questions
What are common problems with the Honda Cb/cl 125-250 Custom Bobber? +
Carb gummed from ethanol/old fuel: Cold start, idle quality, throttle response smoothness (moderate) | Corroded or dead electrical components: All lights, kill switch, horn, charging voltage at battery (moderate) | Worn cam chain causing rattling noise: Cold start rattle, listen at top end on idle (serious)
Is the Honda Cb/cl 125-250 Custom Bobber good for beginners? +
Not really — the Honda Cb/cl 125-250 Custom Bobber is better for experienced riders.
Is the Honda Cb/cl 125-250 Custom Bobber reliable? +
Owners report 2 critical issues to watch for on the Honda Cb/cl 125-250 Custom Bobber, notably: Worn cam chain causing rattling noise (Cold start rattle, listen at top end on idle). Buy with a pre-purchase inspection.
Is the Honda Cb/cl 125-250 Custom Bobber good for daily use? +
Better as a weekend/track bike than a daily — it's a specialist machine.
What gear should I buy for a Honda Cb/cl 125-250 Custom Bobber? +
Motoryk has curated a Top 10 gear list specifically for the Honda Cb/cl 125-250 Custom Bobber, covering engine oil, tires, chain, battery, and brake pads — see motoryk.com/bikes/honda/cb-cl-125-250-custom-bobber/top10. Each pick is matched to this bike's spec.