Menu
🏍️
Bikes
⭐
Reviews
⚖️
Compare
📚
Guides
📊
Samples
camera_alt
Free Inspection
Start a new bike check
Privacy
Terms
All Bikes/Harley-davidson/Street Bob
Harley-davidson Street Bob
Cruiser style114

Harley-davidson Street Bob

The Harley-davidson Street Bob has a top speed of 185 km/h (estimated; note: electronically limited in some markets), produces 93 hp and weighs 291 kg. Motoryk rates it 7.8/10.

The Harley-Davidson Street Bob was introduced in 2006 as part of the Dyna family, designed as a minimalist, stripped-down bobber-style cruiser with a blacked-out aesthetic. It underwent a significant platform change in 2018 when it moved to the Softail chassis with a more rigid-looking frame and updated Milwaukee-Eight engine, retiring the Dyna platform. It remains one of Harley-Davidson's most popular models, celebrated for its raw, classic styling and accessible entry point into the H-D lineup.

93 hp

Power

145 Nm

Torque

291 kg

Weight

185 km/h (estimated; note: electronically limited in some markets)

Top Speed

5.5 L/100km (approximately 18 km/L) — estimated real-world average

Fuel

Naked

Body

🔧 Service Schedule & Parts

Affiliate · we may earn
📍 What's due on yours?
Milwaukee-Eight (2018+) / Twin Cam 96 (2006-2017)
Service item Every Typical cost Parts
🛢️ Engine oil + oil filter 8,000 km / 5,000 mi or 12 mo $60-120 🛢️ Buy →   ⚙️ Buy →
🌬️ Air filter 16,000 km / 10,000 mi — 🌬️ Buy →
⚡ Spark plugs 16,000 km / 10,000 mi — ⚡ Buy →
🛑 Brake pads 15000-25000 km $50-100 🛑 Buy →
💧 Brake fluid 24,000 km / 15,000 mi or 2 yr —
🛞 Tires 15000-25000 km $250-500 🛞 Buy →
🔩 Major service 16,000 km / 10,000 mi $400-800
💰 Annual upkeep ~$500-900 🔩 Reliability 7/10 Belt-drive V-twin cruiser with no coolant system; uses Harley-Davidson 360 Multi-Grade or Syn3 oil; belt drive replaces chain and requires periodic tension/wear checks every 8000km

Video Review

Watch Video Review

What Buyers Should Know

🔧

Milwaukee-Eight Reliability

The Milwaukee-Eight 107 engine (2018+) significantly improved reliability over older Twin Cam motors, running cooler and requiring less frequent service intervals of 5,000 miles. Most owners report minimal issues past 50,000 miles with proper maintenance.

⚠️

Watch for Heat Issues

Rear cylinder heat buildup in stop-and-go traffic is a known complaint — check for heat shields and consider an aftermarket stage 1 tune. Early 2018-2019 models had some compensator sprocket noise worth inspecting before purchase.

💰

Strong Resale Value

The Street Bob consistently holds 70-80% of its original value after two years, outperforming many competitors in its class. Its stripped-down bobber styling has broad appeal, making it one of Harley's easier models to resell quickly.

Generations & Specs by Year

2006–2017 Gen 1

Original Dyna-platform Street Bob with Twin Cam 96/103 engine, minimalist bobber styling, wide handlebar.

expand_more
8.1/10

"Stripped-down Dyna that actually earns its attitude."

The Twin Cam 103 pulls hard from 2,000 rpm and sounds exactly like a V-twin should — that loping, uneven idle never gets old after two years of ownership. The Dyna chassis gives you something softer Softails can't: actual cornering clearance and a frame that tracks honestly through sweepers rather than just looking good in a parking lot. That said, 302 kg is a genuine number you feel every time you muscle it off a sidestand on a camber, and the stock seat turns your tailbone into a complaint department after about 90 minutes. The vibration through the pegs and bars at highway cruise is period-correct Harley — charming at first, fatiguing on a four-hour run.

Pros

+Torque-rich from walking pace
+Dyna chassis handles surprisingly well
+Minimalist look needs zero modification
+Low seat height for reach

Cons

−Stock seat is genuinely punishing
−Highway vibration accumulates fast
−Heavy for urban slow-speed work
Best for: Urban cruiser craving real character Skip if: You tour long distances daily
2018–2020 Gen 2

Moved to Softail platform, Milwaukee-Eight 107 engine, improved suspension, lighter and stiffer frame.

expand_more
2021–2024 Gen 3

Redesigned with solo seat standard, blacked-out minimalist look, Milwaukee-Eight 114 engine option added.

expand_more

Used Buyer Review

7.8/10
Best for
Urban riders wanting authentic Harley character cheaply

"The best-value Harley experience you can buy used today."

$8,500-$16,000 used

The Street Bob is Harley's stripped-back bruiser — no frills, no apologies. It's the bike you buy when you want the Milwaukee iron experience without paying for a bunch of chrome you'll never polish. The 114ci Milwaukee-Eight in post-2018 models is genuinely strong, pulling hard from low revs with that characteristic potato-potato lope that still makes grown men emotional. Handling is better than the fat-tire crowd will admit, though don't expect canyon carving — this thing wants to cruise, not chase sportbikes. On used examples, check the primary chain tensioner and watch for leaky pushrod tubes on anything pre-2017. The softail frame used from 2018 onward transformed the ride quality dramatically, so I'd steer hard toward that generation if budget allows. Electronics are basic, which is actually a blessing — less to go wrong. Previous owners love bolting stuff on, so you'll often find exhaust upgrades and handlebars already done, which cuts your modification budget nicely.

Pros
Cons
Skip if: You tour long distances or hate vibration

Variants of the Harley-davidson Street Bob

Same bike, different trim or year-range — pick the one matching the listing.

1 variant
Best gear for the Harley-davidson Street Bob

Top 10 Accessories

Curated picks for the Harley-davidson Street Bob — owned, ridden, recommended.

Affiliate · we may earn

Common Problems

🔥 1 CRITICAL
⚠️Primary chain tensioner wear and noise MODERATE

Listen for rattling at idle, cold start especially

Fix cost: $200-$500
💡Heat soak and vapor lock issues MINOR

Test restart after 20-minute hot soak period

Fix cost: $50-$200
🔥Compensator sprocket failure and clunking SERIOUS

Clunk when engaging first gear, check service history

Fix cost: $400-$900
💡Fork seal leaks on front suspension MINOR

Oil residue on fork tubes below seals

Fix cost: $150-$350

✅Pre-Purchase Checklist

☐Check for compensator clunk in first gear
☐Inspect fork tubes for oil seepage
☐Verify no check engine or ABS lights
☐Cold start and listen for primary rattle

Solid cruiser, watch compensator and primary chain

Full Specifications

Engine Power 93 hp @ 5,020 rpm (2018+ Milwaukee-Eight 107)
Torque 145 Nm @ 3,000 rpm (2018+ Milwaukee-Eight 107)
Top Speed 185 km/h (estimated; note: electronically limited in some markets)
Weight 291 kg (wet/curb weight — 2021 model)
Fuel Consumption 5.5 L/100km (approximately 18 km/L) — estimated real-world average
Type Cruiser
Fairing No Fairing (Naked)

Rivals & Alternatives

Bikes that buyers cross-shop with the Harley-davidson Street Bob

Compare Harley-davidson Street Bob Side-by-Side

compare_arrows

Specs, power, weight & buyer verdict — head-to-head with the bikes most often cross-shopped.

More Harley-davidson Street Bob Guides

More from Harley-davidson

View all Harley-davidson models →

Community Reviews

Discussion

Frequently Asked Questions

What are common problems with the Harley-davidson Street Bob? +

Primary chain tensioner wear and noise: Listen for rattling at idle, cold start especially (moderate) | Heat soak and vapor lock issues: Test restart after 20-minute hot soak period (minor) | Compensator sprocket failure and clunking: Clunk when engaging first gear, check service history (serious)

Is the Harley-davidson Street Bob a good motorcycle? +

The best-value Harley experience you can buy used today. Rating: 7.8/10. Best for: Urban riders wanting authentic Harley character cheaply. Avoid if: You tour long distances or hate vibration.

What is the horsepower of the Harley-davidson Street Bob? +

The Harley-davidson Street Bob produces 93 hp @ 5,020 rpm (2018+ Milwaukee-Eight 107), with 145 Nm @ 3,000 rpm (2018+ Milwaukee-Eight 107) of torque. Top speed: 185 km/h (estimated; note: electronically limited in some markets).

Is the Harley-davidson Street Bob good for beginners? +

Yes — the Harley-davidson Street Bob is a reasonable choice for new riders (93 hp is manageable), weighing 291 kg. Urban riders wanting authentic Harley character cheaply

Is the Harley-davidson Street Bob reliable? +

Owners report 1 critical issue to watch for on the Harley-davidson Street Bob, notably: Compensator sprocket failure and clunking (Clunk when engaging first gear, check service history). Buy with a pre-purchase inspection.

Is the Harley-davidson Street Bob good for daily use? +

Urban riders wanting authentic Harley character cheaply Fuel: 5.5 L/100km (approximately 18 km/L) — estimated real-world average.

How fast is the Harley-davidson Street Bob? +

The Harley-davidson Street Bob reaches a top speed of 185 km/h (estimated; note: electronically limited in some markets), producing 93 hp at 291 kg curb weight. Real-world performance depends on rider weight, gearing, and road conditions.

What gear should I buy for a Harley-davidson Street Bob? +

Motoryk has curated a Top 10 gear list specifically for the Harley-davidson Street Bob, covering engine oil, tires, chain, battery, and brake pads — see motoryk.com/bikes/harley-davidson/street-bob/top10. Each pick is matched to this bike's spec.