What causes TFT display glitching or going blank on the CFMoto 800MT-X?

Boot display, check for dead pixels or flickering Estimated fix cost: $50-$200

What causes Fuel pump failure causing stalling on the CFMoto 800MT-X?

Cold start hesitation, rough idle, unexpected cutouts Estimated fix cost: $150-$400

Uneven idle, excessive vibration at low RPM Estimated fix cost: $80-$150

Clunking over bumps, check pivot points for rust Estimated fix cost: $100-$300

Known issues to inspect before buying a used CFMoto 800MT-X. What to check and how much repairs cost.

MINOR

Boot display, check for dead pixels or flickering

Fix cost: $50-$200

SERIOUS

Cold start hesitation, rough idle, unexpected cutouts

Fix cost: $150-$400

MODERATE

Uneven idle, excessive vibration at low RPM

Fix cost: $80-$150

MODERATE

Clunking over bumps, check pivot points for rust

Fix cost: $100-$300

☐Check for firmware updates completed by owner

☐Test ride at highway speeds for vibration

☐Inspect frame welds and suspension bearings

☐Verify dealer service history and ECU codes

Decent budget ADV, needs attentive maintenance